Authors

Mohammed Liman Yerima

Department of Materials and Metallurgical Engineering, School of Infrastructure, Process Engineering and Technology, Federal University of Technology, PMB 65, Minna, Niger State, Nigeria

Muhammad Isah

Dept. of Mechanical Engg., School of Infrastructure, Federal University of Technology, Niger State, Nigeria & Dept. of Computer Engineering, School of Engineering, Federal Polytechnic Kaltungo, Gombe State, Nigeria

Alhassan T. Yahaya

Department of Materials and Metallurgical Engineering, School of Infrastructure, Process Engineering and Technology, Federal University of Technology, PMB 65, Minna, Niger State, Nigeria

Abstract

Carbon nanotubes (CNTs) have exceptional mechanical, thermal, and electrical properties (Young’s modulus ~1 TPa, tensile strength up to ~63 GPa), making them attractive fillers for polymer composites. This review examines CNT–polymer nanocomposites tailored for the harsh conditions of oil and gas environments. We discuss CNT structures and polymer matrices (thermoplastics, thermosets, elastomers), synthesis and processing methods (dispersion, functionalization, alignment, additive manufacturing), and characterization techniques (mechanical testing, thermal/electrical measurements, chemical exposure, corrosion and swelling tests). Key application areas include downhole drilling fluids (shale inhibitors), pipeline and well coatings (corrosion protection, seals), enhanced oil recovery fluids, and sensors. Comparative case studies from recent literature are tabulated (e.g., SWCNT/PVP nanocomposites achieved 68% shale swelling reduction; CNT-filled epoxy coatings showed superior barrier properties). Challenges such as CNT dispersion, scale-up, long-term durability, health/safety, and cost are analyzed. We identify research gaps, including field-scale tests and standard aging protocols, and suggest future directions, including hybrid fillers, recyclable matrices, and in situ monitoring. In conclusion, CNT–polymer composites show promise for oil & gas applications but require continued development in processing and real-world validation.

Keywords

Carbon Nanotubes; Nanocomposites; Corrosion Resistance; Drilling Fluids; Enhanced Oil Recovery; Functionalization

Citation of this Article

Mohammed Liman Yerima, Muhammad Isah, & Alhassan T. Yahaya. (2026). Carbon Nanotube–Polymer Composites for Oil and Gas: An Overview of Applications and Challenges. Current Journal of Engineering and Science Research. 3(10), 19-27. Article DOI: https://doi.org/10.47001/CJESR/2026.310003 

Licence Copyright (c) 2026 Current Journal of Engineering and Science Research. This work is licensed under a Creative Commons Attribution Non Commercial 4.0 International Licence.

References

  1. M.F. Yu, “Fundamental Mechanical Properties of Carbon Nanotubes: Current Understanding and the Related Experimental Studies,” J. Eng. Mater. Technol., vol. 126, no. 3, pp. 271–278, Jul. 2004, doi: 10.1115/1.1755245.
  2. A.N. Volkov and L. V. Zhigilei, “(Invited) Thermal and Electrical Conductivity of Carbon Nanotube Network Materials: Theoretical Analysis and Mesoscopic Simulations,” ECS Meeting Abstracts, vol. MA2020-01, no. 7, pp. 703–703, May 2020, doi: 10.1149/MA2020-017703mtgabs.
  3. A.Zeinedini, A. Akhavan-Safar, and L. F. M. da Silva, “The role of agglomeration in the physical properties of CNTs/polymer nanocomposites: A literature review,” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, vol. 240, no. 2, pp. 193–231, Feb. 2026, doi: 10.1177/14644207251316470.
  4. C. Huang, L. Cui, L. Qiu, Y. Zhang, G. Wei, and X. Du, “Impact of nanoparticle agglomeration on thermal conductivity of molten salt based nanofluids: Insights from molecular dynamics and lattice Boltzmann methods,” Solar Energy Materials and Solar Cells, vol. 266, p. 112691, Mar. 2024, doi: 10.1016/j.solmat.2024.112691.
  5. S. Tamayo-Vegas, A. Muhsan, C. Liu, M. Tarfaoui, and K. Lafdi, “The Effect of Agglomeration on the Electrical and Mechanical Properties of Polymer Matrix Nanocomposites Reinforced with Carbon Nanotubes,” Polymers (Basel)., vol. 14, no. 9, p. 1842, Apr. 2022, doi: 10.3390/polym14091842.
  6. A.O. Fulmali, S. K. Ramamoorthy, and R. K. Prusty, “Functionalization of Carbon Nanotube,” in Handbook of Carbon Nanotubes, Cham: Springer International Publishing, 2022, pp. 299–339. doi: 10.1007/978-3-030-91346-5_63.
  7. A.Meftahi et al., “Carbon nanotubes and nanofibers as building blocks for the future: Structure, synthesis, properties, and functionalization perspectives,” Materials Science and Engineering: B, vol. 322, p. 118622, Dec. 2025, doi: 10.1016/j.mseb.2025.118622.
  8. M. Zambrzycki, R. Wielowski, M. Gubernat, D. Jantas, B. Paczosa-Bator, and A. Fraczek-Szczypta, “The impact of chemical functionalization of carbon nanotubes on the electrochemical performance of carbon fiber/pyrocarbon/carbon nanotube composites as potential materials for electrodes for nerve cell stimulation,” Appl. Surf. Sci., vol. 670, p. 160713, Oct. 2024, doi: 10.1016/j.apsusc.2024.160713.
  9. M. J. Rosemary, “Manufacturing Techniques for Carbon Nanotube-Polymer Composites,” in Handbook of Carbon Nanotubes, Cham: Springer International Publishing, 2022, pp. 687–710. doi: 10.1007/978-3-030-91346-5_2.
  10. N. MohdNurazziet al., “Fabrication, Functionalization, and Application of Carbon Nanotube-Reinforced Polymer Composite: An Overview,” Polymers (Basel)., vol. 13, no. 7, p. 1047, Mar. 2021, doi: 10.3390/polym13071047.
  11. P. Parnian and A. D’Amore, “Fabrication of High-Performance CNT Reinforced Polymer Composite for Additive Manufacturing by Phase Inversion Technique,” Polymers (Basel)., vol. 13, no. 22, p. 4007, Nov. 2021, doi: 10.3390/polym13224007.
  12. E. W. Fenta and B. A. Mebratie, “Advancements in carbon nanotube-polymer composites: Enhancing properties and applications through advanced manufacturing techniques,” Heliyon, vol. 10, no. 16, p. e36490, Aug. 2024, doi: 10.1016/j.heliyon.2024.e36490.
  13. M. Su, B. Zheng, and J. Liu, “A scalable CVD method for the synthesis of single-walled carbon nanotubes with high catalyst productivity,” Chem. Phys. Lett., vol. 322, no. 5, pp. 321–326, May 2000, doi: 10.1016/S0009-2614(00)00422-X.
  14. B. Nieet al., “High-Aspect-Ratio Multiwalled Carbon Nanotube Structures for Flexible Transparent Electrothermal Films,” Langmuir, vol. 41, no. 18, pp. 11454–11462, May 2025, doi: 10.1021/acs.langmuir.5c00434.
  15. S. Rahmam, N. M. Mohamed, and S. Sufian, “Effect of acid treatment on the multiwalled carbon nanotubes,” Materials Research Innovations, vol. 18, no. sup6, pp. S6-196-S6-199, Dec. 2014, doi: 10.1179/1432891714Z.0000000001038.
  16. O. B. Okafor, A. P. I. Popoola, and O. M. Popoola, “Functionalization and modification of carbon nanotubes—Polymer-based matrices for supercapacitor electrodes,” in Polymer Nanocomposites, Elsevier, 2026, pp. 221–247. doi: 10.1016/B978-0-443-13756-3.00005-1.
  17. I.-Y. Jeon, D. Wook, N. Ashok, and J.-B. Baek, “Functionalization of Carbon Nanotubes,” in Carbon Nanotubes - Polymer Nanocomposites, InTech, 2011. doi: 10.5772/18396.
  18. S. Bora, D. Pooja, and H. Kulhari, “Applications of Surface Modified Carbon Nanotubes in Drug Delivery,” 2022, pp. 19–46. doi: 10.1021/bk-2022-1425.ch002.
  19. O. Burlaka, A. Yemets, Y. Pirko, and Y. Blume, “Non-covalent Functionalization of Carbon Nanotubes for Efficient Gene Delivery,” 2016, pp. 355–370. doi: 10.1007/978-3-319-30737-4_30.
  20. C. Hu, Y. Xu, S. Duo, R. Zhang, and M. Li, “Non‐Covalent Functionalization of Carbon Nanotubes with Surfactants and Polymers,” Journal of the Chinese Chemical Society, vol. 56, no. 2, pp. 234–239, Apr. 2009, doi: 10.1002/jccs.200900033.
  21. K. Gnanasekaranet al., “3D printing of CNT- and graphene-based conductive polymer nanocomposites by fused deposition modeling,” Appl. Mater. Today, vol. 9, pp. 21–28, Dec. 2017, doi: 10.1016/j.apmt.2017.04.003.
  22. A.Rana, I. Khan, S. Ali, T. A. Saleh, and S. A. Khan, “Controlling Shale Swelling and Fluid Loss Properties of Water-Based Drilling Mud via Ultrasonic Impregnated SWCNTs/PVP Nanocomposites,” Energy & Fuels, vol. 34, no. 8, pp. 9515–9523, Aug. 2020, doi: 10.1021/acs.energyfuels.0c01718.
  23. A.Trauth, K. Kirchenbauer, and K. A. Weidenmann, “Dynamic-mechanical-thermal analysis of hybrid continuous–discontinuous sheet molding compounds,” Composites Part C: Open Access, vol. 5, p. 100148, Jul. 2021, doi: 10.1016/j.jcomc.2021.100148.
  24. S. Bal and S. S. Samal, “Carbon nanotube reinforced polymer composites—A state of the art,” Bulletin of Materials Science, vol. 30, no. 4, pp. 379–386, Aug. 2007, doi: 10.1007/s12034-007-0061-2.
  25. W. Badeghaish, M. Noui-Mehidi, and O. Salazar, “The Future of Nonmetallic Composite Materials in Upstream Applications,” in SPE Gas & Oil Technology Showcase and Conference, SPE, Oct. 2019. doi: 10.2118/198572-MS.
  26. Z. Liu, H. Bai, Y. Luo, Q. Zhang, and Q. Fu, “Achieving a low electrical percolation threshold and superior mechanical performance in poly( l -lactide)/thermoplastic polyurethane/carbon nanotubes composites via tailoring phase morphology with the aid of stereocomplex crystallites,” RSC Adv., vol. 7, no. 18, pp. 11076–11084, 2017, doi: 10.1039/C6RA27401C.
  27. M. A. Mohammed and T. Babadagli, “Experimental Investigation of Wettability Alteration in Oil-Wet Reservoirs Containing Heavy Oil,” SPE Reservoir Evaluation & Engineering, vol. 19, no. 04, pp. 633–644, Oct. 2016, doi: 10.2118/170034-PA.
  28. M. Iannuzzi, A. Barnoush, and R. Johnsen, “Materials and corrosion trends in offshore and subsea oil and gas production,” Npj Mater. Degrad., vol. 1, no. 1, p. 2, Jul. 2017, doi: 10.1038/s41529-017-0003-4.
  29. A. H. Al-Moubaraki and I. B. Obot, “Corrosion challenges in petroleum refinery operations: Sources, mechanisms, mitigation, and future outlook,” Journal of Saudi Chemical Society, vol. 25, no. 12, pp. 101–370, Dec. 2021, doi: 10.1016/j.jscs.2021.101370.
  30. W. O. Emofurieta and A. O. Odeh, “Swelling Characteristics of Shales and Their Dispersion in Drilling Muds III,” Pet. Sci. Technol., vol. 28, no. 15, pp. 1535–1543, Aug. 2010, doi: 10.1080/10916460903117560.
  31. P. Nyanor, O. El-Kady, H. M. Yehia, A. S. Hamada, K. Nakamura, and M. A. Hassan, “Effect of Carbon Nanotube (CNT) Content on the Hardness, Wear Resistance and Thermal Expansion of In-Situ Reduced Graphene Oxide (rGO)-Reinforced Aluminum Matrix Composites,” Metals and Materials International, vol. 27, no. 5, pp. 1315–1326, May 2021, doi: 10.1007/s12540-019-00445-6.
  32. Som Sengupta, “Engineering performance through geometry: A comparative analysis of swcnts vs. Mwcnts,” Journal of Informatics Education and Research, vol. 5, no. 4, Aug. 2025, doi: 10.52783/jier.v5i4.3534.
  33. A.Rana, I. Khan, S. Ali, T. A. Saleh, and S. A. Khan, “Controlling Shale Swelling and Fluid Loss Properties of Water-Based Drilling Mud via Ultrasonic Impregnated SWCNTs/PVP Nanocomposites,” Energy & Fuels, vol. 34, no. 8, pp. 9515–9523, Aug. 2020, doi: 10.1021/acs.energyfuels.0c01718.
  34. G. Cai, J. Hou, D. Jiang, and Z. Dong, “Polydopamine-wrapped carbon nanotubes to improve the corrosion barrier of polyurethane coating,” RSC Adv., vol. 8, no. 42, pp. 23727–23741, 2018, doi: 10.1039/C8RA03267J.
  35. J. Hao, K. Yang, J. Wu, M. Wu, and Y. Li, “Overview of Recent Developments in Composite Epoxy Resin in Organic Coating on Steel (2020–2024),” Materials, vol. 18, no. 7, p. 1531, Mar. 2025, doi: 10.3390/ma18071531.
  36. Utkarsh and P. K. Jain, “Enhancing the properties of swelling soils with lime, fly ash, and expanded polystyrene -A review,” Heliyon, vol. 10, no. 12, p. e32908, Jun. 2024, doi: 10.1016/j.heliyon.2024.e32908.
  37. X. Huang, C. Yang, J. Chen, X. Qiao, S. Zhang, and D. Song, “Enhanced Protective Performance of Carbon Nanotube-Reinforced Waterborne Epoxy Zinc-Rich Coatings for Corrosion Protection of Steel Structures,” Coatings, vol. 14, no. 12, Dec. 2024, doi: 10.3390/coatings14121493.
  38. N. M. Dawoo, A. M. Natt, and T. A. Jas, “Effect of Multi-Walled Carbon Nanotubes (MWCNTs) in Reducing the Corrosion Rate in Cr-MWCNTs Composite Coatings,” 2022. [Online]. Available: www.scientific.net.
  39. I. E. Amusan, M. A. Ajayi, I. O. Oladele, A. O. Alabi, and O. A. Orisawayi, “Emerging applications of carbon-based nanomaterials as anticorrosive coatings: A review on protection mechanisms and performance evaluation,” Next Chemical Engineering, vol. 3, p. 100060, Dec. 2026, doi: 10.1016/j.nxcen.2026.100060.
  40. H. Soleimani et al., “Impact of carbon nanotubes based nanofluid on oil recovery efficiency using core flooding,” Results Phys., vol. 9, pp. 39–48, Jun. 2018, doi: 10.1016/j.rinp.2018.01.072.
  41. A.A. Aliuet al., “Sustainable hybrid composite ceiling tiles from waste LDPE reinforced with Sidaacuta fibers and recycled paper pulp nanofillers: Mechanical, thermal and microstructural performance,” Results in Engineering, vol. 30, no. 3, p. 110302, Jun. 2026, doi: 10.1016/j.rineng.2026.110302.